Instalando BeOS

INSTALANDO BeOS

Así que os ha picado la curiosidad de esto del BeOS se pronuncia bios, bueno pues un poco de ayuda no viene nada mal así que os he hecho una somera animación de como instalar el BeOS en vuestro ordenador y no morir en el intento os advierto que se pueden borrar los SOs que tengáis instalados si no vais con cuidado sería preferible que lo probarais con VirtualBox o Qemu por poner dos de los programas aquí expuestos o con alguna imagen hecha para el VMWarePlayer que es una aplicación para virtualizar SOs también gratuita. Haiku tiene hechas pero son meras carcasas casi sin contenido pero listas para probar.

Esta hecha la animación con el installer o instalador que os saldrá con el BeOSMAX en todas la versiones de BeOS siempre sale porque es bueno en PCBSD o Debian hasta hace unos dos años no habían instaladores gráficos y este por lo menos tiene ya 10 años o mas.

Lo primero que veréis es que el instalador os indica que no hay volúmenes para instalar el SO así que hay que crearlos, a no ser que tengáis una instalación antigua, vais abajo botón izquierdo setup partitions y le dais veréis que se abre una ventana Drive setup.

Ahí ya depende de lo que uséis ya sea disco real en partición primaria o lógica o si usáis la virtualización en este caso siempre os saldrá un solo disco duro sea el caso que sea seleccionáis a donde queréis instalar y a continuación pincháis en setup se os abrirá otra ventana y en ella seleccionáis cuantas particiones y de que tipo queréis que sea el Sistema de Archivos o FS mejor BeOS y toda la distribución de espacio para la primera partición vamos una única partición / yo os aconsejo que dediquéis unos 4 gigas para probarlo bien el BeOS crea su swap en ellas también automáticamente y a lo largo del tiempo han ido apareciendo aplicaciones que podréis encontrar en BeBits.

peliculilla

Hay espíritus que sobreviven a lo que les echen, por cierto el tío Bill se ha jubilado y no sabe que hacer le podríamos proponer como CEO, Presidente de la Compañía de este proyecto :) Ximo

Instala el Leopard en 3 Pasos

Pues eso es lo que esta noticia recoge, visto lo visto que el Flyakite no sigue, intentaremos ver si leyendo lecturas instructivas podemos medrar un poco mas en estos conocimientos. Copio pego el original en inglés por si lo borran a continuación. Aunque el tiempo todo lo cura lo aconsejable es esperar a que saquen imagenes iso un tanto mas tratables.

INSTALA EL LEOPARD EN 3 PASOS

Hack Attack : Install Leopard on your PC in 3 easy steps!

Well its been only a day since the Mac OSX Leopard was released officially by Apple and the hackers have managed to create a patched DVD that everyone like you and me can use to install Leopard on PC’s without having to buy a Mac. Please note the tutorial that I am going to post is still experimental and things might not work the right way simply because it is still early days in hacking Leopard to work on PC’s. Well if you don’t mind your PC getting screwed then go ahead and try out this tutorial.
Make sure you backup all important data before you proceed. Here are the things that you will need before Install Leopard on your PC…
The Patched DVD Image
The zip file containing the patch
One pen drive or USB Flash Drive formatted as FAT32
Well once you have all these you can go ahead and Install Leopard..

Step 1. Getting things ready

Burn the DVD Image onto a Single Layer DVD-R using a software like Nero.
Format the USB Flash Drive and the drive label should be "Patcher" without the quotes. Please note it has to be "Patcher" only and nothing else for the patch to work when we apply it later.
Extract the Zip file and put its contents into the USB Flash Drive.
Now your USB Drive should contain a folder called "files", if it doesn’t then check to see where you have gone wrong.

Step 2. Installing Leopard

Now that you have the Patched DVD with you, you can now install Leopard. Pop in the DVD into the drive and boot into it by pressing F12 at the BIOS Prompt.
Boot into the DVD and the installer should now load. It take a while though, so be patient.
Select your Language and make sure you select Customize and you need to deselect all the packages that are displayed.
Leopard will now install. This can take a while, so go grab yourself a coffee.
It will ask you to Reboot, so go ahead and Reboot. Before rebooting make sure that USB Flash Drive is connected to the PC.

Step 3. Patching Leopard

Now that you have got Leopard installed, you need to patch it. Before we do that Boot into the Leopard DVD like the way you did before.
Wait for the Darwin Bootloader to load. Once it loads up press F8. You should now see a prompt. Type -s and hit enter. The DVD will now load in Verbose mode. Watch for any errors. It should load without a problem because you have already installed Leopard.
Once the setup is loaded select your Language. Once done you should now be seeing the Welcome Screen. Once there navigate to Utilities-Terminal.
Once the terminal loads up, you now need to browse to your USB Drive, so follow the steps below, typing it exactly as it appears below in the Terminal.
In the command line type the following as they appear here
cd .. cd .. cd Volumes cd Patcher cd files
Notice the space between cd and the 2 dots.
Now its the time to run the patcher to make sure Leopard will work on your PC. Type the following into the Terminal.

./9a581PostPatch.sh

The Patch should now run. You can answer Yes while removing the ACPUPowerManagement.kext
After the Script is done, you should now be able to Boot into Leopard after you restart.

Step 4. Congratulations! You’ve done the Impossible!

Well that was it. Please note this has not been extensively tested, so most of your Hardware like Sound, Network may not work. If something goes wrong for you or you want to help us, then please join the discussion over at OSX86Scene. If you noticed I haven’t posted the links to the Torrent that contains the DVD image and the zip. Well I haven’t posted them because I am sure the lawyers over at Apple are going to sue the hell out of me. If you wondering where you can find them, then head over to Demonoid and search for it.
Well here are few screenshots by Mac.nub over at the forums who could get Leopard working on his system.

Some Updates and Clarifications :
This Hack works on Intel PC’s with atleast SSE3
You need to format your Leopard Partition to HFS+
Make Sure you install Leopard on MBR and not GUID or it won’t boot.
More Patched DVD’s from Uphuck, Netkas is in the works so it would be better if you wait for the polished releases to come out.